OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0900

TPMS Sensor 1 Battery

C0900 does not appear in the publicly available J2012 code lists, and no carmaker publishes it for tire pressure monitoring. The one official mention points elsewhere: GM upfitter bulletin 80C for the 2008-2014 Silverado and Sierra HD chassis cab lists C0900 subcode 07 as Device Voltage High, a supply fault logged by the PTO module. The title instead means the battery inside the first wheel transmitter. A Schrader patent describes a single lithium cell and spare function bits in every radio word that can carry a low battery message. Mitsubishi books exactly this case for tire 1 as C1910 and names the cell built into the transmitter as the likely cause. Expect the TPMS lamp; the unit is replaced and its ID registered again.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number9 / 00

Possible causes

  • Built-in lithium cell of the wheel transmitter at end of life high
  • Aged cell whose voltage sags in cold weather medium
  • On GM vehicles the code may instead stem from excessive module supply voltage (Device Voltage High) low

Symptoms

  • TPMS warning lamp flashes after start, then stays lit
  • Pressure reading for one wheel drops out intermittently, more often in cold weather

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0900

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication