C0860
Trailer Stability Assist Performance
No carmaker documents C0860 openly, and it does not appear in any accessible list. The title names trailer sway control, an extra function of the stability control that uses the existing ESC sensors to spot a swinging trailer and then brakes single wheels and trims engine torque until the combination calms down. A Bosch patent detects sway as the gap between target and measured yaw rate, filtered to roughly 0.5 to 1.5 Hz so that normal steering is ignored, and can counter it by shifting drive torque between rear wheels instead of braking. A performance fault means the function cannot work as intended. Acura shows how makers label this: on the 2007-11 MDX the warning for trailer stability assist lit up together with codes 59-1, 66-1, 67-1 or 69-1, and a faulty brake pedal position switch was to blame.
Possible causes
- Fault in an ESC input such as brake pedal switch, yaw or wheel speed signal high
- Trailer not recognised because of trailer socket or wiring faults medium
- Stability control software or configuration needing an update low
Symptoms
- Trailer stability or ESC warning lamp on
- No automatic braking when the trailer sways
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0860
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.