OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0853

Active Damping Control Rear Right

C0853 is undocumented in public sources; no carmaker's list, bulletin or manual mentions it. The title is about the adjustable damper at the right rear. Such dampers only work as well as the inputs behind them: the control unit takes in body and wheel motion from accelerometers and sets each valve accordingly. BMW reprogrammed the variable damper control of X6 (F16) cars built in late 2014 because tolerance spread in the wheel accelerometers made it shut electronic damping off and leave the car on a conventional setting. For the actuator itself, GM's 2011 Saab models (9-5, 9-4X) use C0590 for this corner, and Stellantis uses C15C8 and C15C9 on the Ram 1500 from 2024. A failed rear right channel makes the car ride on fixed damping and shows a suspension warning.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number8 / 53

Possible causes

  • Open or shorted circuit to the right rear damper valve high
  • Implausible wheel acceleration sensor input causing shutdown (BMW SI B37 01 14) medium
  • Damper control unit software needing an update low

Symptoms

  • Suspension fault message
  • Car stays on a fixed damper setting regardless of mode

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C0853

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication