OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0851

Active Damping Control Front Right

C0851 has no public owner: neither code lists nor bulletins name it. Its subject is the adjustable damper at the right front corner. GM's electronic suspension on the 2011 Saab 9-5 files this corner as C0580 with three failure types: 02 when the high side is shorted to ground or to voltage, 04 for an open control line, 0F for an erratic coil current. The system works only between 9 and 16 V; a stored history entry clears after 41 fault-free ignition cycles. ZF's CDC design shows why wiring matters at this point: the proportional valve sits either inside, fed through the piston rod, or outside on the tube with its own sealed plug, and it is reset within milliseconds. Stellantis uses C15C4 and C15C5 for this corner. Damping falls back to a fixed setting.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number8 / 51

Possible causes

  • Corroded or loose plug at the right front damper high
  • Proportional valve in the damper failed medium
  • Supply outside 9-16 V causing erratic current readings low

Symptoms

  • Suspension warning in the instrument cluster
  • Body movements less controlled over bumps

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C0851

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication