OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0850

Active Damping Control Front Left

No manufacturer publishes C0850, and no code list carries it, so its use cannot be shown. The title refers to the electrically adjusted shock absorber at the left front. Its control unit sends a pulse width modulated current through a valve coil in the damper and measures the current that really flows; when the two differ, it stores a fault. GM does exactly this under its own number C0575 (Left Front Damper Actuator Circuit) on the 2011 Saab 9-5 and 9-4X, a meaning that differs from the J2012 use of C0575. The module then turns electronic damping off for that ignition cycle and shows SERVICE SUSPENSION SYSTEM. Stellantis uses C15C2 and C15C3 for the two left front valves (compression, rebound) on Ram 1500 and Charger from 2024.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number8 / 50

Possible causes

  • Damaged or loose cable and plug at the front left strut high
  • Valve coil inside the damper open or shorted, damper must be replaced medium
  • Faulty driver stage in the suspension control module low

Symptoms

  • Service suspension message
  • Damping no longer adapts, ride feels harsher or floatier

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C0850

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication