C0840
Air Suspension Solenoid Valve Circuit
C0840 is not documented anywhere in public; no list, bulletin or manual of any carmaker uses it. The title concerns the electrical side of the valves that route air in a self-levelling suspension. Some systems carry one switching valve per air spring in a central block next to the compressor, as in a Continental patent that also places fast lowering valves there; older Ford and Lincoln designs put a two-position vent solenoid on top of each spring, opened by the vehicle dynamics module to fill or vent. A circuit fault means the module sees an open, a short or wrong current on a coil. Bentley logs such a case as C11C613, an open circuit at the rapid filling valve of the Bentayga, and checks the connector first. The affected corner can no longer be raised or lowered.
Possible causes
- Water or corrosion in the valve connector (Bentley 2064579/1 checks the plug first) high
- Open or shorted valve coil, often after moisture got into the system medium
- Chafed harness at the valve block or air spring low
Symptoms
- Air suspension warning or service message
- One corner sags or ride height cannot be changed
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0840
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.