C0823
Air Suspension Height Sensor Rear Right
C0823 is unknown to every public source, from code lists to the NHTSA index and maker documentation. The title refers to the rear right level sensor. Its reading matters most when loading, since the module uses the rear heights to keep ground clearance and headlamp aim constant. Stellantis gives the rear right corner its own code, C152A, and on the 2022-23 Ram 1500 with four-corner air suspension a stuck rear sensor reading was resolved by reprogramming the module, with the battery held between 13.2 and 13.5 V during the flash (08-127-23). HELLA's level sensor brief lists a 12-bit resolution and an operating range from -40 to 125 °C. A suspect sensor is checked against its lever position before replacement.
Possible causes
- Rear right height sensor, lever or ball joint worn or broken high
- Corroded or loose sensor connector, damaged harness medium
- Air suspension module software needing an update (Stellantis 08-127-23) low
Symptoms
- Service air suspension message
- Rear right sits low or high, load levelling inactive
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0823
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.