C0821
Air Suspension Height Sensor Front Right
C0821 leaves no public trace in public lists, bulletins or maker indexes; going by its name it means the front right level sensor. HELLA builds such sensors as a housing on the body with a lever and ball joint to the axle, using potentiometer, Hall or contactless inductive elements, fed with 4 to 11 V and sending analogue, PWM, SENT or PSI5 signals. Stellantis logs the front right sensor as C1522: subcode 11, a grounded signal wire, on the 2022 Grand Wagoneer, where its STAR case notes the code can also appear after the car was jacked up or lifted, and subcode 2A for a stuck signal on the 2022-23 Ram 1500. A ground fault often hides in a wet or damaged connector at the wheel arch.
Possible causes
- Signal wire shorted to ground by chafing, water or corrosion high
- Code stored after the car was jacked or lifted, sensor at end of travel medium
- Front right height sensor or its lever defective medium
Symptoms
- Service air suspension message
- Vehicle leans to the front right or levelling is switched off
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0821
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.