C0820
Air Suspension Height Sensor Front Left
Nobody documents C0820 in the open; apart from Honda bulletin IDs that happen to contain the string, searches of lists and indexes found nothing. The title concerns the ride height sensor at the left front corner, a lever on the control arm turning an angle sensor that reports body height to the air suspension module. Stellantis uses its own numbers here: C151E for a stuck left front sensor on the 2022-23 Ram 1500, fixed by new module software (08-127-23, 08-150-24), and C1567 for an implausible left front level on the 2021 Grand Cherokee, where pinched front air lines were the cause. Without a valid front left height, the module stops levelling that corner or the whole car and shows a service message.
Possible causes
- Bent, detached or seized sensor lever or link at the front left control arm high
- Water, corrosion or chafing at the sensor plug or harness in the wheel arch medium
- Air suspension module software reporting a false stuck sensor (Stellantis 08-150-24) low
Symptoms
- Service air suspension message
- Front left corner sits too high or too low, height changes refused
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0820
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.