C0815
Air Suspension Compressor Overtemperature
C0815 has no public owner: code lists and maker indexes skip it, and the NHTSA index only matches it inside unrelated BMW bulletin IDs. The title names thermal protection of the air suspension compressor. Most systems have no temperature sensor and estimate the heat from running time instead. Continental patents describe two strategies: switching the pump off above a calculated limit and back on only when it has cooled enough for one full level change on a loaded vehicle, or pulsing it near the limit so that a lift of 20 to 30 s can still finish. Long lifts at standstill, frequent level corrections, fast off-road driving and heavy sound insulation heat it most; a leak that keeps it running has the same effect.
Possible causes
- Leak in an air spring, line or valve block keeps the compressor running high
- Repeated manual level changes at standstill or heavy load changes medium
- Worn or moisture-damaged compressor delivering too little air medium
Symptoms
- Ride height change stops or is refused for several minutes
- Air suspension warning, vehicle sits low after long standing
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0815
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.