OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0810

Air Suspension Compressor Circuit

C0810 cannot be located anywhere public, whether in code lists, the NHTSA index or the GM, Saab and Mitsubishi material. The title concerns the electrical drive of the air suspension compressor, an electric motor that Continental describes with carbon brushes stressed by inrush current. Lexus uses its own code C1752 for the motor circuit on the 2013-17 LS460 and traces it to corrosion inside the compressor after water enters through the intake tubes; the fix is a new compressor and motor assembly. Mercedes-Benz likewise reports moisture and corrosion in the compressor that cut its output and leave deposits on the valve block seats, and counters it with software. A dead circuit means the springs can no longer be filled, so the body sinks or stays at one level.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number8 / 10

Possible causes

  • Water ingress and corrosion seizing or loading the compressor motor high
  • Compressor relay or fuse failed medium
  • Open, shorted or corroded wiring or connector at the compressor medium

Symptoms

  • Air suspension warning message in the cluster
  • Vehicle sits low or does not change ride height

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0810

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication