C0745
Electric Power Steering Overtemperature Protection
Public documentation of C0745 is missing; it is not in the publicly available J2012 tables, in NHTSA bulletins or in maker indexes. GM reports an overheated EPS controller as C0176 (PIT5213B). The protection itself is well described in a Delphi patent: instead of relying on thermistors, the controller squares the motor current and runs it through several low-pass filters, each standing for one thermal time constant, the slowest close to 2,000 s. When a filter exceeds its limit, motor current is reduced step by step, more strictly when the motor is stalled against a lock. The example motor handles 15 A continuously or 75 A for about 5 s. Long parking manoeuvres or holding full lock therefore make the steering heavier until the unit cools down.
Possible causes
- Long parking manoeuvres or holding the wheel at full lock high
- Stiff steering gear, joints or tyres raising motor load medium
- Temperature estimate or sensor in the module faulty low
Symptoms
- Steering gradually heavier after repeated manoeuvring
- Power steering warning message
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0745
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.