OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0740

Electric Power Steering Voltage Supply

C0740 is not publicly documented by any carmaker; publicly available J2012 lists, NHTSA bulletins and maker indexes do not contain it. The title concerns the heavy supply feed of an electric steering, which draws high currents when the wheel is turned at standstill. GM bulletin PIT5405C for 2014-17 Silverado, Sierra, Tahoe, Suburban, Yukon and Escalade shows what a weak feed does: reduced assist, kickback in the wheel, even stalling and blank displays, traced to a poor body ground, a battery cable shorting on the starter shield, high-resistance battery connections, a weak battery or a loose main power and ground connector at the rack. GM logs device power faults there as C0800. NXP describes EPS control units with integrated undervoltage monitoring that limit or stop assist when supply sags.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number7 / 40

Possible causes

  • Loose or corroded main power or ground connection at the rack high
  • Discharged or failing battery, high-resistance battery cables medium
  • Battery cable shorting elsewhere or poor body ground low

Symptoms

  • Assist weakens or cuts out at low speed and full lock
  • Steering wheel jerks, other displays flicker

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for C0740

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication