C0727
Trailer Connector Circuit Malfunction
C0727 has no public trace in the public J2012 tables, NHTSA bulletins or maker indexes, and trailer faults usually sit in B or U codes. The circuits behind the title are documented. GM trucks with the trailering app have a trailer lighting module that powers the socket with pulse-width signals; in 2019 the park, stop and turn circuits had to draw at least 55 mA before a trailer was recognised, and the module watches for bulb outage and overcurrent. Trailers with their own lighting module can confuse it. Ford traced false trailer connected messages on the 2019-20 Ranger to moisture in the 4-pin and 7-way connectors, and Stellantis advises packing the Ram 2500 bumper socket with dielectric grease against corrosion. Lamps on the trailer then fail or flicker.
Possible causes
- Moisture or corrosion in the vehicle trailer socket high
- Short, LED load too low or own lighting module on the trailer medium
- Damaged vehicle harness or trailer lighting module low
Symptoms
- Trailer lamps inoperative or flickering
- Trailer connected/disconnected message without reason
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for C0727
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.