OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0725

Electric Power Steering Motor Circuit

C0725 has no public documentation; the publicly available J2012 tables, NHTSA bulletins and maker indexes leave it out. Carmakers file assist motor faults elsewhere: GM uses C0475, including symptom 64 for a detected slip in the motor circuit (bulletin PIT5213B), and Stellantis C1592, which the 2019 Jeep Cherokee could log as a general electrical failure and which a software flash addressed under bulletin 08-034-20, sometimes together with a MIL. The motor is usually a brushless machine fed by a power stage; NXP describes control units that measure rotor position and the current in each phase and set PWM duty cycles through field-oriented control. A circuit fault here means a phase, the power stage or the wiring does not behave as commanded, so the module cuts or reduces assist and steering becomes heavy.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number7 / 25

Possible causes

  • Motor winding or power stage in the EPS unit defective high
  • Module software misdiagnoses the motor circuit (update available) medium
  • Poor connection between module and motor medium

Symptoms

  • Steering warning, assist reduced or lost
  • Steering feels notchy or jerks while turning

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C0725

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication