OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0715

Power Steering Pressure Sensor Range/Performance

C0715 is not traceable in public material; the publicly available J2012 tables, the NHTSA bulletin index and maker code lists all lack it. The function it names is well known from engine diagnostics, where the same check runs as P0551. On hydraulic steering the pump pressure rises with steering effort and a switch or sensor tells the engine controller to raise idle. Mitsubishi flags the circuit when the switch stays on after a stop that follows at least 4 s above 50 km/h; Saab sets P0551 on the 9-3 when the switch state changes for 600 s above 50 km/h and keeps the higher idle meanwhile. Toyota replaced the sensor on the 2007-08 Tundra to cure circuit low and high codes. Typical results are stalling or dipping idle at full lock, or a raised idle when driving straight.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number7 / 15

Possible causes

  • Pressure sensor or switch stuck or drifting high
  • Fluid seeping into the sensor connector medium
  • Pump pressure abnormal due to low fluid or worn pump low

Symptoms

  • Idle dips or engine stalls at full steering lock
  • Idle stays raised while driving straight

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for C0715

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication