OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0712

Power Steering Position Sensor Range/Performance

No carmaker is known to document C0712; it is not in the J2012 tables, bulletins or maker indexes searched. The title points to a position input of the power steering whose value is outside the expected band or does not track the other signals. An electric power steering relies on three position measurements: driver torque, the angle of the assist motor and the absolute steering wheel angle; Infineon offers separate angle sensors for the last two. How much an implausible angle hurts is shown by GM bulletin PI0800D for 2013 Equinox, Terrain, Malibu, LaCrosse and Regal: after a botched steering angle alignment the EPS logs a code that will not clear, assist drops to manual after only part of a turn and the car tries to steer to one side at speed. A new calibration or reflash usually follows.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number7 / 12

Possible causes

  • Steering angle or position learn skipped or done wrongly high
  • Position sensor in the steering gear or column defective medium
  • Intermittent connection in the sensor wiring low

Symptoms

  • Power steering warning, assist reduced or lost
  • Steering wheel off centre or vehicle drifts to one side

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0712

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication