OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0700

Active Steering Module Communication

No public record shows a carmaker using C0700; public J2012 lists, NHTSA bulletins and maker indexes are silent. The title concerns superimposed steering such as the system from the Bosch-ZF venture that BMW introduced on the 2004 5 Series. A compound planetary set in the steering shaft adds an angle from an electric motor that turns the carrier, and an electromagnetic lock holds that carrier still whenever the function is off. A separate controller needs the angles at the wheel and at the pinion plus vehicle and wheel speeds over the network to compute the extra angle. If that exchange breaks down, the logical reaction is to lock the gear set, leaving a fixed ratio with full hydraulic assist; the car steers normally but feels slower at parking speeds. Lost communication is more often filed under U codes.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number7 / 00

Possible causes

  • Damaged bus wiring or connector to the active steering controller high
  • Steering angle or wheel speed message missing from another module medium
  • Active steering controller without power or defective low

Symptoms

  • Steering warning in the instrument cluster
  • Steering ratio stays fixed, more wheel turns when parking

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C0700

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication