C066D
Service/Park Brake Chamber Pressure Sensor
C066D covers a fault in the transducer reporting the air pressure inside the service/spring brake chambers of an air-braked vehicle. No maker documents the code, but the diagnosis of real systems is published. Bendix's Intellipark electronic parking brake measures the delivery pressure of every channel with its own transducer and logs J1939 faults for signals shorted high or to ground; if a sensor fails, park status for that unit cannot be shown, rollaway mitigation is lost and the driver is told to chock the wheels. A WABCO (now ZF) patent uses such a sensor to decide whether the spring brakes are applied or released. Knorr-Bremse, which also builds the parking brake into its electronic air control unit, places sensors at the control inlet and the outlet of the relay valve so each reading can serve as a cross-check on the other.
Possible causes
- Sensor signal or 5 V supply shorted to ground or voltage high
- Pressure transducer in the valve module defective medium
- Sensor outputs shorted together or connectors swapped low
Symptoms
- Parking brake indicator flashes, park status unknown
- Automatic park functions such as rollaway protection unavailable
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C066D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.