C066B
Right Rear Wheel Speed Sensor B Correlation
The second right rear speed value is electrically fine but disagrees with its references. No carmaker documents C066B or its limits. A Ford patent shows a check that suits a driven rear axle: the right rear speed is calculated as twice the output shaft speed divided by the axle ratio, minus the measured left rear speed. If measured and calculated values differ beyond a tolerance on consecutive passes or for more than 0.2 s, the fault is registered, and the calculated value stands in meanwhile. The tolerance can be tightened with lateral acceleration, and the side under more load gets the closer look. Bosch describes a similar estimate from the three other wheels, validated against the gearbox output. Wrong tyre sizes or a damaged encoder can trigger such a mismatch.
Possible causes
- Mismatched tyre size or tread depth at the right rear high
- Encoder with missing or extra pulses medium
- Axle ratio or tyre data in the module not matching the vehicle low
Symptoms
- Warning after a fast or long drive
- Traction or stability functions temporarily reduced
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C066B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.