OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0668

Right Rear Wheel Speed Sensor B Circuit Low

C0668 points to a channel reading that is too low for the second right rear sensor. No carmaker documents the code, so the limit is not public. With a current-output sensor the floor is easy to define: in NXP's KMI25 a constant source of about 7 mA runs the whole chip and is always present, even when no pulse is sent. A reading under that level means current is leaking past the sensor to ground or the sensor is not getting enough voltage. NXP's application note for the older KMI15 explains why this interface is chosen: the module turns the sensor current into a voltage across a load resistor, which keeps the signal robust over longer leads. A partly crushed lead along the rear suspension can produce exactly such a low reading.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number6 / 68

Possible causes

  • Crushed or chafed lead leaking current to ground high
  • High contact resistance lowering the sensor voltage medium
  • Sensor B internal current source defective low

Symptoms

  • Warning lamp for ABS or stability control
  • Redundant speed information at the right rear missing

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0668

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication