C0665
Left Rear Wheel Speed Sensor B Incorrect Component Installed
C0665 says the part on the second left rear speed channel is not the one the module expects. No carmaker documents the code or how it identifies the part. Typical mix-ups arise at the wheel bearing. Motor magazine describes bearings whose magnetic encoder ring sits on the inboard face: pressed in the wrong way round, nothing passes the sensor and speed codes appear right after the repair, while the reversed bearing is usually ruined. On the sensor side, NXP sells the KMI25 in two variants, one for magnetised multipole rings and one for steel gear wheels, so a sensor matched to the other encoder type will not work properly. GM's PIP5094 lists C0665 merely as an earlier GM number with another meaning.
Possible causes
- Wheel bearing fitted with the encoder facing away from the sensor high
- Sensor made for a different encoder type or vehicle medium
- Replacement hub without encoder ring fitted low
Symptoms
- Warning appears right after a bearing, hub or sensor replacement
- Redundant brake functions not available
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0665
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.