C0664
Left Rear Wheel Speed Sensor B Correlation
C0664 flags that the second left rear speed value disagrees with its reference speeds, although its circuit is sound. No carmaker publishes the comparison. Two patents show how a rear wheel can be cross-checked. Bosch uses the left rear wheel as its example of a failed or omitted sensor: the module estimates that wheel from the other three, for instance as the front average or as front left plus front right minus rear right, and checks the result against the gearbox output speed. A fault counts only when the deviation stays above a threshold for a set time. Ford relies on the differential: the mean of both rear wheels follows from the output shaft speed and the final drive ratio. A sensor that disagrees with such references gets flagged even though it still sends pulses.
Possible causes
- Damaged or wrong encoder ring giving a false pulse count high
- Tyre of different size or heavily worn on the left rear medium
- Sensor B losing pulses at high speed low
Symptoms
- Warning set after a longer drive, not at start
- Automated or redundant brake functions refused
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0664
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.