C0662
Left Rear Wheel Speed Sensor B Circuit High
C0662 is stored when the second left rear speed channel reads above anything the sensor itself can deliver. NXP's KMI25 uses three current steps: about 7 mA at rest, 14 mA for a logic one of its data protocol and 28 mA for each speed pulse. A higher value can only come from outside the sensor, such as contact with battery voltage, a chafed wire touching another feed or moisture bridging the plug. Motor magazine measured 10 to 11 V on the supply wire of Honda sensors; a signal lead that has worn through against that wire will climb towards the same voltage. No carmaker documents C0662 publicly. It also appears in GM's keyword list PIP5094, but only as a former GM code with an unrelated meaning.
Possible causes
- Signal lead shorted to battery voltage or to the sensor feed high
- Moisture or corrosion bridging pins in the connector medium
- Sensor B drawing excessive current internally low
Symptoms
- Warning lamp for ABS or stability control
- Module switches channel B off, redundant functions unavailable
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0662
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.