C0661
Left Rear Wheel Speed Sensor B Circuit Low
With C0661 the second left rear speed signal sits below the lowest level an intact sensor ever outputs, typically because the signal lead touches ground or the sensor feed has collapsed. No carmaker documents this code. What normal looks like is shown by a Motor magazine measurement on Honda sensors: a healthy unit switches cleanly between about 0.70 V and 1.40 V with a 50 % duty cycle, and a pickup magnet held against the sensor tip makes it switch. A level that stays below the lower band therefore points to wiring rather than to the encoder. Rear wheel speeds matter beyond ABS: in an HL Mando design the electric parking brake on the rear wheels uses them to calculate slip and backs off before a wheel locks during an emergency stop.
Possible causes
- Signal lead chafed through and touching ground high
- Sensor supply pulled down, e.g. by water in the plug medium
- Sensor B shorted internally low
Symptoms
- Warning for brake or stability system shortly after start
- Emergency braking support of the electric parking brake may be restricted
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0661
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.