C0660
Left Rear Wheel Speed Sensor B Range/Performance
C0660 means the wiring of sensor B at the left rear tests good, yet its output fails to act like a wheel speed: it may vanish at speed, jump or show an odd pulse pattern. No published service data defines the check. Mounting is a common reason. NXP's application note for magnetoresistive speed sensors explains that a sensor placed off-centre to its target delivers a weaker signal with extra offset, which shows up as a duty cycle well away from 50 %, while a tilt below about 4° hardly matters. The KMI25 even reports the problem itself: one bit of its AK protocol is set when the magnetic field becomes too weak for normal operation. GM's keyword list PIP5094 contains C0660 only as an older GM number with a different meaning.
Possible causes
- Sensor seated off-centre or too far from its encoder high
- Encoder ring worn, dirty or weakly magnetised medium
- Sensor B degraded internally low
Symptoms
- Warning only appears while driving, often above a certain speed
- Assistance functions withdrawn while ABS on sensor A continues
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0660
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.