C065F
Left Rear Wheel Speed Sensor B Circuit/Open
C065F reports that the second speed channel at the left rear wheel has no closed circuit. No carmaker publishes this code and no service bulletin mentions it, so the exact test is unknown. With active sensors an open is easy to recognise: NXP's KMI25 draws a constant base current of about 7 mA through the same two wires that carry its speed pulses, so a broken lead or a loose plug leaves the module with no current at all. A Motor magazine test on Honda sensors found 10 to 11 V supplied by the ABS unit and stressed that the sensor goes silent once that feed is lost, which is why the supply is checked before the sensor is condemned. As long as sensor A still works, ABS normally carries on; functions that need the second signal are withdrawn.
Possible causes
- Broken lead or loose, corroded plug between sensor and module high
- Sensor B open internally medium
- Supply output for channel B in the brake module not switched on low
Symptoms
- Warning for brake or driver assistance system right after switching on
- Functions relying on the second rear left signal not available
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C065F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.