C065E
Right Front Wheel Speed Sensor B Incorrect Component Installed
C065E means the module rejects the part fitted as the second speed sensor on the right front hub. Wheel speed sensors differ in their output scheme, and the receiving electronics are set up for one of them: TI's TPIC7218-Q1 is configured per sensor type, using two current thresholds for active sensors and four for VDA sensors that add 9 data bits. Allegro's A81415, a power management chip for electromechanical brakes, decodes two-level, PWM and three-level AK sensors, high-resolution versions included. Even within one family, Infineon sells the TLE5046SiC as an LR and an ERR variant in which bit 0 means air gap reserve in one case and an error flag in the other. Compare part numbers before suspecting the wiring; no carmaker documents C065E.
Possible causes
- Replacement sensor with a different output protocol or variant high
- Single-channel sensor fitted where a dual-channel part belongs medium
- Brake module not configured or coded for the fitted sensor low
Symptoms
- Warning appears soon after a sensor or hub replacement
- Redundant braking or automated driving functions not available
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for C065E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.