OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C065D

Right Front Wheel Speed Sensor B Correlation

C065D says the second right front speed value disagrees with its comparison partners although no circuit fault is found. What it is compared with depends on the architecture. A Knorr-Bremse patent for commercial vehicles lets a separate redundancy system read part of the wheel speeds, for instance one wheel per axle, and exchanges all values over CAN, which makes a second sensor at every wheel unnecessary; there a mismatch can also stem from the data link between two control units. Continental's sensor with two elements can either switch to the healthy element or average both, which first requires deciding whether they agree. For automated driving, Bosch Engineering adds a redundant brake unit to its integrated power brake. No carmaker publishes C065D or its tolerance.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number6 / 5D

Possible causes

  • Sensor B badly seated or air gap differing from sensor A high
  • Encoder track damaged where only one element reads it medium
  • Disturbed data exchange between the brake control units low

Symptoms

  • Warning for brake or driver assistance system after a drive
  • Automated driving functions refused, ABS usually unaffected

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C065D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication