OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C065C

Right Front Wheel Speed Sensor B Intermittent/Erratic

C065C describes a second right front speed signal that vanishes now and then or carries irregular pulses. With AK protocol sensors, Pico's oscilloscope guide shows that the sensor keeps sending a data packet roughly every 147 ms even while the wheel stands still, so a break in that rhythm exposes a loose contact without the car moving. Pico also notes that some data bits are assigned by the sensor or vehicle maker, and that filtering helps to separate noise from real pulses when measuring. Inside Infineon's TLE5046SiC one safety check fires when more than two consecutive pulses appear on the speed path without a matching event on the direction path, or the reverse, and an EMC feature rides through short supply interruptions. No carmaker documents C065C.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number6 / 5C

Possible causes

  • Loose contact in plug or cable, often where the cable flexes with steering high
  • Encoder ring with dirt, metal chips or cracks medium
  • Interference from nearby high-current lines or damaged shielding low

Symptoms

  • Warning that comes and goes, e.g. on rough roads or while steering
  • Automated or redundant brake functions intermittently withdrawn

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C065C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication