C065A
Right Front Wheel Speed Sensor B Circuit Low
C065A means the current in the circuit of right front sensor B stays below its lowest valid level. TI's TPIC7218-Q1, an interface chip that powers and reads four wheel speed sensors, rates a current under about 4.5 mA as undercurrent and labels it a possible short to ground. A low reading can also come from the sensor itself: Infineon's TLE5046SiC drops to a constant error current of at most 3.8 mA when it detects an internal fault, and falls back to that level too when its supply sinks below 3.5 V. So the supply voltage at the plug is the first thing to measure. Normal levels for such sensors are 7 and 14 mA, plus 28 mA for the speed pulse in the AK protocol. No carmaker publishes C065A; the left front counterpart is C0653.
Possible causes
- Signal line chafed through and touching ground high
- Supply at the sensor too low, e.g. from contact resistance medium
- Sensor reports an internal fault with its error current medium
Symptoms
- Warning for brake or driver assistance system right after switching on
- Redundant braking or automated driving not available
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C065A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.