OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0659

Right Front Wheel Speed Sensor B Range/Performance

The second right front speed signal arrives, but its quality or value does not fit. For sensors using the VDA AK protocol, Infineon's TLE5046SiC shows what a module can read besides speed: a 3-bit air gap gauge and, in one variant, a reserve bit that is set once the magnetic signal drops below twice the value at the limit air gap. A weakening signal thus becomes visible before pulses are lost. UN Regulation 13-H requires ABS sensor anomalies that cannot be seen at standstill to be detected by 10 km/h, or by 15 km/h where a wheel that is not turning could cause a false alarm; how quickly a B channel gets rated remains unpublished, and no carmaker documents C0659. Likely causes: too large an air gap from bearing play or a loose holder, a dirty or damaged encoder, a wrong sensor.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number6 / 59

Possible causes

  • Air gap too large from wheel bearing play or a loose sensor holder high
  • Encoder ring dirty, cracked or weakened medium
  • Unsuitable replacement sensor low

Symptoms

  • Warning for brake or driver assistance system, often only while driving
  • Automated functions withdrawn while ABS on sensor A continues

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0659

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication