C0658
Right Front Wheel Speed Sensor B Circuit/Open
C0658 reports an open in the wiring of right front sensor B, so the module sees no supply current on that channel. Sensor B is the redundant partner found mainly in brake systems built for automated driving; ABS normally keeps running on sensor A, where an open would show as C0506. Audi's patent for such a pair gives each sensor its own data line to the controller, so that one broken line cannot remove both signals, and suggests a passive inductive sensor as the second one because it works without any supply. For the anti-lock function itself, UN Regulation 13-H demands that every electrical fault, external wiring included, lights the yellow warning. Check plug, cable and sensor. No carmaker publishes C0658; GM's old PIP5094 list uses the number for something else.
Possible causes
- Broken or torn sensor cable, often near the steering knuckle high
- Connector not latched, corroded or with spread terminals medium
- Sensor B interrupted internally low
Symptoms
- Warning for brake or driver assistance system
- Redundant braking or automated driving not available
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0658
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.