OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0656

Left Front Wheel Speed Sensor B Correlation

C0656 flags a mismatch between the B signal at the left front hub and the values it is checked against, typically sensor A on the same hub, while the circuit itself tests good. No carmaker publishes this code or its limits. Two patent designs show what such a comparison can catch. Continental Teves placed two magnetoresistive paths of different sensitivity in one housing; a comparator inside the sensor checks whether both deliver the same frequency, because a disturbed path can flip and even double the reading. Audi proposed pairing an active Hall sensor with a passive inductive one on the same pulse wheel, so that a supply failure cannot silence both. Likely causes: a damaged encoder, a sensor sitting too far from its encoder, mixed-up parts.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number6 / 56

Possible causes

  • Sensor not seated correctly, air gap out of tolerance high
  • Damaged, dirty or partly demagnetized encoder ring medium
  • Sensor of a different type or side fitted low

Symptoms

  • Warning for brake or driver assistance system
  • Automated or redundant brake functions withdrawn, ABS usually still active

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0656

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication