C0655
Left Front Wheel Speed Sensor B Intermittent/Erratic
C0655 points to a second left front speed signal that drops out or jumps. Active sensors read the wheel through closely spaced sensing elements whose phase-shifted signals also give the rotation direction, as FenderBender explains, so small mechanical faults show up as irregular pulses. HELLA lists the usual reasons a wheel sensor fails: broken wiring, internal shorts, heavy dirt, extra wheel bearing play and a damaged encoder. Volvo Truck's dual-element design discards a channel that reads zero and carries on with the other. Bosch stresses that the redundant signal must be permanently available to avoid delays when the backup actuator takes over. GM's PIP5094 lists C0655 only as an unrelated old GM number.
Possible causes
- Loose contact or partly broken wire that moves with the steering and suspension high
- Dirt or damage on the magnetic encoder medium
- Excessive wheel bearing play changing the air gap low
Symptoms
- Warning that comes and goes, often on rough roads or while steering
- Automated or redundant brake functions intermittently withdrawn
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0655
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- fenderbender.com/running-a-shop/operations/article/33023362/active-wheel-speed-sensors
- hella.com/techworld/au/technical/sensors-and-actuators/check-and-change-abs-and-wheel-speed-sensors/
- patents.google.com/patent/EP4194291B1/en
- bosch-mobility.com/en/solutions/sensors/wheel-speed-sensor/
- static.nhtsa.gov/odi/tsbs/2013/MC-10112857-9999.pdf