C0653
Left Front Wheel Speed Sensor B Circuit Low
C0653 means the circuit of left front sensor B sits below its valid level. Active wheel speed sensors usually signal through current steps; Allegro gives 7 and 14 mA as typical levels and a safe state below about 3.9 mA that a sensor uses to report its own fault. A reading under the lower band can therefore come from a shorted or chafed line, a supply that has dropped, or the sensor itself flagging an error. In Bosch's shared-sensor design each ECU feeds its sensors and checks supply voltage and the lines for shorts and opens. Bosch also offers a redundant-signal version of its wheel speed sensor, so the second channel is always ready for the backup actuator. No carmaker documents C0653.
Possible causes
- Sensor B line chafed through and shorted to ground high
- Supply from the secondary control unit too low medium
- Sensor in its fault (safe) state after an internal error low
Symptoms
- Warning for brake or driver assistance system
- Redundant braking or automated driving not available
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0653
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.