C0650
Brake Pressure Sensor N Range/Performance
Sensor N reports a pressure that is electrically valid but disagrees with the commanded or expected value. WABCO's truck EBS runs a matching test: with a defined magnetic flux in the proportional valve a minimum brake pressure must build up at the front axle brakes, or at the valve that controls the trailer, and when the vehicle brakes via pneumatic backup the rear axle must reach a set minimum once the front exceeds a threshold. A Kelsey-Hayes patent avoids a second complete sensor by putting two sensing elements on one diaphragm and flagging a fault when their readings differ beyond a threshold. Neither source uses the code; C0650 and the letter N are not assigned publicly. Causes: drift, valve faults, leaks, air.
Possible causes
- Sensor N reading drifted high
- Valve or modulator not building the commanded pressure medium
- Leak or air in the measured circuit low
Symptoms
- Warning lamp on after braking
- Pressure control falls back to an emergency mode
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C0650
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.