OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C064A

Brake Pressure Sensor M Circuit High

C064A: the voltage from sensor M exceeds what any valid pressure would give. On WABCO's Trailer EBS D the brake pressure sensor of an extra EBS relay valve, for example on a drawbar trailer's front axle, draws its supply from the trailer modulator and returns its actual value as an analog signal; all active sensors share supply outputs that are protected against short circuits. A short from that supply to the signal pin therefore drives the reading to the top. Kelsey-Hayes adds the opposite path: an open circuit lets a bridge output rise to supply level, so a high code does not exclude a broken wire. No passenger-car maker documents C064A. With the channel discarded, the system falls back to reduced functions.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number6 / 4A

Possible causes

  • Signal pin shorted to the sensor supply or battery voltage high
  • Open sensor ground or signal line letting the input float high medium
  • Sensor output stuck at its upper limit low

Symptoms

  • Brake or ABS warning lamp on
  • Load-dependent or electronic pressure control disabled

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C064A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication