OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0646

Brake Pressure Sensor L Circuit High

C0646 means the signal of brake pressure sensor L lies above the band a real pressure can produce. A Kelsey-Hayes patent spells out the logic for a bridge-type brake sensor: a healthy output stays between zero and the supply voltage, so a reading equal to supply points to an open circuit, not to maximum pressure. A high code can therefore hide a lost ground or a broken signal line as well as a short to 5 V. Truck trailer brakes show where extra analog pressure sensors appear: WABCO's Trailer EBS D feeds an optional external brake pressure sensor from the modulator and reads it on a 0–5 V analog input. No carmaker documents C0646 or names its sensor L. Because a phantom pressure would suggest an application that is not taking place, the module stops trusting the channel.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number6 / 46

Possible causes

  • Sensor ground open, so the signal floats up to supply level high
  • Signal line shorted to the 5 V reference or battery voltage medium
  • Sensor electronics driving the output to its upper limit low

Symptoms

  • ABS/ESC warning lamp on
  • Stability control or electronic brake pressure control switched off

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0646

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication