OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0642

Brake Pressure Sensor K Circuit High

C0642 means the output of sensor K exceeds its upper limit. Electro-hydraulic brakes like Mercedes' Sensotronic Brake Control work with a high-pressure accumulator and a pedal value sensor with two Hall elements; during a pre-drive check the unit pressurises the calipers to test, among other things, its pressure sensors. A high fault on any such sensor would make the module believe the brakes are applied. Saab's 9-5 sets its sensor code above 4.75 V for 0.1 s; GM's 2019 EBCM uses 95.24 % of supply on the main channel and 94.50 % on the reference channel. No maker says which sensor would be K, so the letter cannot be linked to a location. Typical: short to 5 V or battery, lost sensor ground, internal fault.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number6 / 42

Possible causes

  • Signal shorted to 5 V or battery voltage medium
  • Lost sensor ground medium
  • Internal fault of sensor K signalled at the upper rail medium

Symptoms

  • Brake system and ESC warning lamps on
  • Brake lights or hold functions may be requested wrongly on some systems

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0642

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication