C063C
Brake Pressure Sensor H Range/Performance
Sensor H gives an electrically valid yet implausible pressure. In Toyota's eight-sensor patent the check connects a pressure source to a brake cylinder: both readings should then nearly match, and a gap beyond a threshold means one of the two sensors, the passage or the cylinder is at fault; the switch-over is preferably made at standstill. Ford's hybrid brake, which has only two pressure sensors, shows typical limits: a P1 offset outside ±16 bar, or both sensors more than 50 bar apart for 100 ms. That Ford needs no letters beyond A and B also shows that H exists only in larger systems. No maker documents C063C. FMVSS 126 requires a telltale for ESC malfunctions, so the driver gets a warning lamp that goes out only after the fault has gone.
Possible causes
- Offset or gain of sensor H drifted out of tolerance high
- Restricted passage or faulty brake cylinder so pressures really differ medium
- Air in the brake fluid distorting the pressure build-up low
Symptoms
- ESC malfunction telltale and ABS lamp on
- Changed pedal feel or reduced brake assistance
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C063C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.