C0636
Brake Pressure Sensor G Circuit High
The voltage of sensor G sits above anything a valid pressure can produce. A Toyota patent shows how a brake gets seven pressure sensors: one for the accumulator, two for the master cylinder chambers and four for the wheel cylinders, all read by the brake ECU. If one of them stops delivering sensible values, that ECU de-energises every valve and motor, and the front wheels are then braked with boosted pedal pressure. Whether Toyota or anyone else calls one of them G is not published. Denso reserves 4.7–5 V as an upper fault band and describes how a missing sensor ground raises the line into that band. GM's 2019 EBCM sets its high codes for brake pressure sensors above 95.24 % of supply for 100 ms. Typical causes: short to 5 V or battery, open ground.
Possible causes
- Signal wire shorted to the 5 V reference or battery voltage medium
- Open or high-resistance sensor ground lifting the output medium
- Sensor G failed internally and driving its output to the top medium
Symptoms
- ABS/ESC warning lamp on
- Live data shows high pressure with the pedal released
- Brake assist and stability functions unavailable
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0636
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.