OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0634

Brake Pressure Sensor A/B Correlation

Two brake pressure sensors that see the same hydraulic pressure should report nearly the same value; C0634 means sensors A and B disagree beyond the allowed margin, even if each signal is valid on its own. Which sensor bears which letter depends on the maker. GM's 2019 brake module tables show the method but file it under C0574: two secondary circuit sensors are compared, with pedal travel as third reference, and a gap above 5 bar for 100 ms sets the fault, Type A with MIL. A Kelsey-Hayes patent places two elements on one diaphragm and disables hydraulic brake assist with a warning lamp when they differ, and a Lucas patent notes that two sensors only show that one is wrong, not which. No maker publishes C0634.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number6 / 34

Possible causes

  • One sensor drifting in offset or gain high
  • Fault in the brake control unit with integrated sensors, often replaced as a unit medium
  • Air or a blocked passage making the sensors see different pressures low
  • Brake module software or calibration needing an update low

Symptoms

  • ABS, stability or brake system warning lamp on
  • Brake assist or driver assistance functions with automatic braking off

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for C0634

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication