C0633
Front Half Shaft Speed Sensor
On all-wheel-drive systems that can uncouple the front axle, a speed sensor on a front shaft tells the controller how fast the uncoupled part turns, so it can match speeds before re-engaging. A BorgWarner patent uses a Hall sensor on the shift sleeve to read both speed and position and engages once the gap to wheel speed is within about ±100–200 rpm; an American Axle patent uses a pinion speed sensor the same way before moving its shift collar. Ford documents C0633 in the AWD module of 2020 Explorer, Aviator and Police Interceptor Utility 4WD built up to 20 Mar 2020: warning messages with C0633, C00A6:07 or both came from an oil-soaked front halfshaft speed sensor; TSB 21-2270 replaces it (0.8 h).
Possible causes
- Sensor contaminated with axle oil (Ford Explorer/Aviator 2020) high
- Failed sensor or damaged wiring and connector medium
- Wrong air gap or damaged sensor target on the shaft low
Symptoms
- AWD or 4WD warning messages in the cluster
- All-wheel drive limited or not engaging
- Possible oil seepage near the sensor
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C0633
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.