C0630
Active Air Dam Stuck
C0630 says the air dam panel itself does not move although the actuator is driven and reports sensible values. GM's patent defines exactly this case: if measured position and motor current agree with each other but both differ from the commanded position, or back-EMF shows unusual load, the panel is at fault rather than sensor or drive. Ford's patent lowers the panel above 45 mph for 15 s or above 55 mph and raises it for 4WD, towing or high temperatures, so a stuck panel stays in the wrong place. Field causes are documented around C0604: broken actuator-to-dam bolts on 2021–2025 F-150s (SSM 54705) and impact damage on Ram trucks. No maker publishes C0630; GM's PIP5094 and PIT5307G list the number with an older meaning.
Possible causes
- Panel bent or jammed after ground contact, debris or a kerb high
- Broken bolts between actuator and panel medium
- Ice, snow or packed mud blocking the guides medium
- Worn or seized screw jack in the actuator low
Symptoms
- Air dam hangs down or does not deploy
- Air dam fault message in the cluster
- Scraping on ramps or slightly higher fuel use on the highway
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C0630
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.