C062B
Variable Effort Steering Module Temperature Too Low
C062B is set when the module or its coil driver reads a temperature below the range it is designed for. Automotive driver chips such as TI's DRV8873-Q1 are specified down to an ambient of −40 °C, so a lower reading means either an extreme cold soak or a measurement that has failed. Cold also changes the steering itself: the GM patent on temperature compensation for magnetic variable effort steering points to thicker fluid and changed electrical and magnetic behaviour, and corrects the coil current with tables tested at different temperatures, either from a fluid temperature sensor or from the current deviation. Outside its table the module cannot compensate and suspends variable effort. No maker publishes C062B. Unlike C062A, warming up usually clears it.
Possible causes
- Vehicle parked for a long time in severe frost medium
- Open or failed temperature measurement inside the module or at the fluid sensor medium
- Moisture or corrosion at the connector distorting the reading low
Symptoms
- Variable effort inactive after a cold start
- Heavy or uneven steering until the system warms up
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C062B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.