OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C062A

Variable Effort Steering Module Temperature Too High

The variable effort steering module, or its coil driver, reports a temperature above its permitted limit. Heat matters twice here: a GM patent on magnetic variable effort steering notes that fluid viscosity, magnet properties and coil current all drift with temperature and either fits a sensor in the fluid sump or infers temperature from the current error. A JTEKT patent warns that a continuously energised steering coil can reach about 200 °C and holds it at or below 100 °C by pulsing it. Driver chips set their own limits; TI's DRV8873-Q1 warns at a die temperature of roughly 140–160 °C and shuts down at 165–185 °C. No maker publishes C062A. The function is typically reduced or suspended until things cool down.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number6 / 2A

Possible causes

  • Very high underhood or fluid temperature, for example after long parking manoeuvres in heat medium
  • Partly shorted coil drawing excess current and heating the driver medium
  • Faulty internal temperature measurement reporting heat that is not there low

Symptoms

  • Variable effort reduced or switched off temporarily
  • Steering feel changes after hard use and returns after cooling

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C062A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication