C0629
Variable Effort Steering Control Module Incorrect Component Installed
C0629 flags a mismatch between what the variable effort steering module expects and what is fitted. Variable-effort gears exist in versions that cannot be swapped blindly: replacement racks come with or without the EVO solenoid, and GM's second Magnasteer generation dropped the permanent magnet and only raises effort with speed, whereas the first one reverses coil current around 45 mph. A Steering Solutions patent shows why this matters: the current's direction decides whether effort goes up or down. A module that detects the wrong part, wrong position or wrong variant blocks its function, much like Mitsubishi's brake unit flags a wheel sensor fitted in the wrong place within 3 s. No maker publishes C0629. It usually follows a gear or module swap.
Possible causes
- Replacement steering gear of the wrong variant, for example without actuator high
- Module from another vehicle or not configured for this equipment medium
- Actuator connected with reversed polarity after a repair low
Symptoms
- Variable assist inactive after a steering or module repair
- Steering effort behaves the wrong way round, heavy when slow
- Steering warning on some vehicles
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C0629
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.