OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0628

Variable Effort Steering Module Performance

C0628 says the unit that runs variable effort steering fails its own function checks. On GM's Magnasteer that unit was a separate module in 1996–97 and became part of the brake control module from 1998. A GM patent describes the logic: a microcomputer reads coil current from speed and lateral acceleration tables, limits the total and its rate of change and drives the coil by PWM; a Steering Solutions patent gives ±3 A full scale. Performance faults cover a driver stage that cannot reach the commanded current, a failed internal self-test or corrupt calibration. GM's Tech 2 can run a function test sweeping the coil current. No maker publishes C0628 in this sense; GM's PIP5094 list (2014 and older) carries the number with an older meaning.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number6 / 28

Possible causes

  • Internal fault in the controlling module or its coil driver stage medium
  • Low or unstable supply voltage so the commanded current cannot be reached medium
  • Corrupt calibration or software after a module replacement or flash low

Symptoms

  • Steering effort no longer changes with speed
  • Heavy steering when parking or light steering at highway speed
  • Steering, ABS or stability warning where the brake module hosts the function

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C0628

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication