C0626
Variable Effort Steering Sensor Circuit Low
C0626 means the signal of the variable effort steering sensor reads below the lowest level the module accepts. A Kelsey-Hayes patent shows the typical window for such a steering wheel sensor: with a 5 V supply each channel switches between roughly 0.6 V and 4.4 V, and anything under the lower band counts as low. After about 5 ms out of range the module stops trusting the signal, and after roughly 100 ms it latches an open or short fault. A Ford patent lists steering wheel rate and position among the inputs of a speed-dependent effort controller. Typical causes are a signal wire shorted to ground, a lost 5 V feed or a failed output stage. No maker publishes C0626. Unlike C0627, the fault lies on the ground side.
Possible causes
- Signal wire chafed through and shorted to ground high
- 5 V sensor feed missing or pulled down by another fault medium
- Sensor output stage failed and stuck low medium
Symptoms
- Variable assist disabled, steering effort fixed
- Steering warning lamp or message
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0626
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.